Termék részletei

Outstanding Reliability

Advanced absolute position measurment

Simplified solid state electronics and reduced wiring by use a CAN bus system

Non-intrusive local controls

Independent position and torque limit setting

Oil bath lubrication

High immunity from spurious signals

Configurable motor drive "enable" input which prevents the actuator operating unless a signal is applied

Casing material selection and coating designed for improved corrosion protection

Environmental sealing - double O-ring sealed terminal compartment

Display - dual stacked LCD display for -50..+70 °C ambient temperature; feedback about position, torque (analouge and digital screen), service alarms, valve alarms, graphical data for application etc.

Bluetooth Setting Tool Pro - by Bluetooth signal and pre-IR for non-intrusive configuration, diagnostics and data download 

Position Control - Absolute position sensor by high accuracy and up to 22 turns in case of range IQTFL (IQT full-turn design)

Non-intrusive local controls - open/close and remote/stop/local selectors by magnetically coupled into the control cover

Drive Train -Rotork part-turn design with whole-life oil lubrication

Hand Operation - Safety manual operation in case of power supply loss, the design is independent of motor drive. It can be selected lockable hand/auto lever (even when motor is running)

IQT mk3 part-turn electric actuator

Sizes: IQT125-IQT3000 ,either directly mounted onto valve,  by 50- 3 000 Nm  output torque range

Mainly for on &off duty up to 60 starts per hour cycle /S2&S3/ A&B Class

Absolute postion sensing  by absolute encoder sensor

Position sensing in : 90° + 10° angular stroke by 0,1° increments.

Mounting flange acc. to national standards - directly onto valve or 2nd stage gearbox, sizes: F10-F16 acc.to ISO 5211

Enhanced and separated outpud drive couplings by types: A; L; B:

A - loads are axial thrust and torsional torque

L - only thrusting loads occuring

B - only torsional torque loads occuring

Amnient temperature:

WT - -30 .. +70 °C

ATEX: -20 .. + 70 °C - available choices for low temperature designs (e.g..: -40/ -50 °C),

Further available certificate under international regions (e.g.: EAC; CSA; IEC 60529 etc.)

Cable entry:

4 x M25 x 1,5

Power Supply:

1 phase

3 phase

DC motor - details in technical catalouges

Control&Indication:

Local Control by - selector switches: Open/ Close and Local/ Stop/ Remote

Local feedback by LCD screen/ configuration, diagnostics, indication of alarms and operating modes, etc.. and by LED indicators.

Remote Control: 24 VDC derived by contacts inside the actuator or from external equipment by customer/ end user

Indication: Standard monitor relay + 4 pcs volt free relay (latching) contacts NO/ NC configured (up to 8 pcs further relays are available

Further features:

Bluetooth communication- non-intrusive configuration/ diagnostic/ data download and upload

Automatic phase rotation correction

Self-maintained in both local and remote control mode

Manual Override option in case of power supply

Mechanical end stoppers for angular motion in both open and close direction

Others: ESD signal active, Interlock is active,, etc.

Control by Fieldbus Interface Cards to connect Network Host:

Pakscan

Modbus

Profibus

Foundation Fieldbus

HART 

Lubricants:

TEXACO ATX/ Dexron 2, Castrol Aero HF585B- std. by: -30 .. + 70 °C and -50..+70 °C possible temperatures

Hydra Lube GB Heavy by -20.. +70 °C temperture (optional food grade classification)

Paint and corrosion protection:

Outer coating protection for instance high level(l>15 years) acc. to ISO 12944-2 (C1..C4/ C5-M, C-I classes)

Basic Rotork Painting procedure and coating:  D1036 (Interpon) by top colour BS4800 00-A-05 Gloss light Grey

Motor:

24 VDC-s motor, H-Insulating Class with imbedded thermostat, speed rate- can be set between 50-100 % of output speed range in 1% increments

Vibration resistance is low

Open &Close Valves(A&B Class)