Most important features:
New intuitive user friendly interface
Dual stacked enhanced LCD screen for status feedback, diagnostic and alarm symbols, data download from datalogger
Toughened glass screen plus optional environmental shield
Setting Tool for secured Bluetooth connection
Solid state relay for high accurate remote feedback and modulating duty
(multi-turn actuators only)
Reduced inner wiring and connection points
Torque Sensor by simplified design (mult-turn variants)
Simplified absolute position encoder by robust design and by reliable high accuracy
New cartridge style (can be separated) for multi-turn variants
Different drive coupling sizes can be taken
Real-time status feedback
3 phase/ 1 phase and 24 VDC direct current power supply
Advanced, multilingual display for status and setup
Detailed data logging
Configuration and communication by Bluetooth signal
InSight2 PC software for Performance analysis
Comprehensive control and flexibility
IQML (3) - linear modulating electric actuator (by 18-72 rpm / 50 Hz)
Sizes: IQML10-12-20-25-35, directly mounted onto linear valves by, 5-57 kN (1,124-12,814 lbf) output thrust rate
For unresticted modulating application up to 1200 start per hour duty rating - Duty Class C (S4-50% at nominal thrust range)
Absolute position sensing by redundant sensor - contactless only by 4 moving parts
Mounting flanges for valves by ISO top-works - directly mounting or by using a 2nd stage gearbox/ Size F10-F30 acc.to ISO 5211
More type enhanced output drive coupling desig/ Types available: A; Z3 (long design); L - type (F10-F14 / M20x1,5/ M36x3 max.)
Ambient temperature - as standard:
WT - -30 .. +70 °C-ig
ATEX: -20 .. + 70 °C-ig - or low temperature design (pl.: -40/ -50 °C),
Different certificate for international region in order to usage allowance (e.g.:: EAC; CSA; IEC 60529 etc.)
Power Supply:
3 phase- detailed in catalouges by manufacturer (Rotork)
Control & Feedback:
Local Control - by selector (magnetically coupled) knobs: Open/ Close and Local/ Stop/ Remote
Local indication on LCD screen by default settings, diagnostic, alarm warnings, etc.. and by supplemantary LED indicators
Remote Control: for proportional control and feedback using 4..20 mA analouge signal (Folomatic control) and std. 24 VDC hardwired
Remote indication: by 4..20 mA with CPT (Current Position Transmitter) - internally powered and auto range to set limits and by standard relay switches (S1..S4) + monitor relay
Other features:
Bluetooth communication- noon-intrusive settings, diagnostic, service alarms
Automatic phase rotation correction
Self maintained both in remote and local control mode
Manual Override in case of power supply
Mechanical end stoppers/ limit switches for open and close limit setting
Foundation Fieldbus Interface Cards for remote control& feedback by Fieldbus Network System
Pakscan
Modbus
Profibus
Foundation Fieldbus
HART
